If you are looking for a strong, bolted and quality building, then you have found it. Award garages are constructed using a fully galvanised c-purlin garage frame, which is bolted together with 12mm high tensile bolts. The purlins are pre-punched, which makes the assembly of the frame quick and easy, and the 10mm thick foot and truss brackets ensure a solid fixing to the slab and maximum rigidity of the frame. Tek screws are used to secure the wall and roof sheeting only.

The c-purlin both hides and encloses the sharp ends of the tek screws inside the garage and ensures no one injures themselves, unlike the top hat which leaves all tek screws exposed to the inside of each wall and roof girt. We use 0.47 high tensile sheeting and roll top ridging is standard in the roofing. We supply external corner flashings, drip trays and roller door flashings to ensure that the quality of our building is never compromised.

The garages are available in a variety of sizes:

The length of the garage is determined by the number of bays, and we have two bay sizes available, being 3m and 3.5m. Thus a garage can be 6m, 9m, 12m, 15m etc, or 7m, 10.5m, 14m, 17.5m etc.

The versatility of the sizes ensures that we can design a garage to your requirements.

Garaports

Garaports are available for all of our garages, and attached to front of the building. These make terrific car ports on the front of garage, or a terrific place to work out of the sun.

Garaports click thumbnails to view large image

Awnings

Awnings are also available for all of our garages, up to 3m wide. These are attached to the side of the building, and maintain the stylish look of the building. These make terrific entertainment areas or carports.

Awnings click thumbnails to view large image

Barns

We are able to supply two styles of barn, being the heritage barn and the colonial barn.

Barns click thumbnails to view large image

Award Garages & Sheds
236 Princes Highway South Nowra NSW 2541
phone: (02) 4422 5033 fax: (02) 4422 5022

sales@awardgarages.com.au